BRAND | Munters |
Product | Type ML180 |
Description | dehumidifier |
Internal code | IMP4864838 |
Technical specification | Sorption dehumidifier in a compact ready-to-use design with: Galvanised sheet steel housing, painted, including hose connectors Titanium silica gel sorption rotor consisting of abrasion-resistant sorbent with special developed micropore structure and high internal stability, particularly suitable for thermodynamic dehumidification process, can also be used with free water in the airflow and can be cleaned with water, with an external sprocket for the drive Heat recovery sector for partial preheating of the regeneration supply air Rotor seals, abrasion-resistant, for separating the two air flows at the top and bottom Gear motor with belt and timing belt for rotor drive Filter mats, grade G3, in process and regeneration air intake Centrifugal fans for process and regeneration airflow with common Drive motor and sealed internal air flow system Heater, electric, for heating regeneration air Overtemperature safety system (HTCO) with two thermostats automatically or manually resettable Basic control and display panel with signaling lights for NETWORK/OPERATION/FAULT and Regeneration temperature display MAN/AUTO selector switch for optional operation with an external moisture meter Hygrostat socket for easy connection of an external control hygrostat Control system manufactured in accordance with the relevant EC standards and ready for connection wired Rotor material, flame retardant, certified according to DIN 4102-1 (BAM) process air Air volume, freely blowing out: 320 m³/h Nominal air flow: 180 m³/h Pressure, externally available, nominal, pressure approx.: min. 200 Pa Regeneration air Nominal air flow: 67 m³/h Pressure, externally available, nominal, pressure approx.: min. 200 Pa dehumidification performance Inlet state of process air 20°C, 60% r.f.: 32.0 l/24h energy requirement E-connection: 1 x 230V, 50Hz, 2.1 kW Dimensions and weight: height: 910 mm Width: 513 mm Depth: 410 mm Weight: 56 kg Noise level: Maximum noise level without air lines: 75 dB (A) |
Please Contact Us to Order to offer competitive prices and delivery time for Munters - Type ML180 dehumidifier number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Slovenia Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
THERMOSTATS
THERMOSTATS
Munters dehumidifier type ML 420
CONTACTOR MA2000,2500
CONTACTOR MA1500-7000
evaporation device
evaporation device
DRIVE MOTOR KIT
ELECTRONIC YGROSTATIS RH98
(Humidifier)
(Humidifier)
(Humidifier)
OVER CURRENT RELAY
OVER CURRENT RELAY
drier
170-028190-002 / M ROTOR R HPS 0454 400
Desiccant Dehumidifier
professional blot
Dehumidifiers
(Dehumidifier)
(Munters dehumidifier type MX2 95)
Full cone VDüse from Polypropylen-28Ltr./2bar Full cone spray angle of 100 °, 1/2 "thread Throughput 28 liters per minute at 2.0 bar / Art. No .: 400239
Full cone VDüse Polypropylene -28L2b Full cone spray angle of 100 °, 1/2 "thread Throughput 28 liters per minute at 2.0 bar / Art. No .: 406588
INDICATOR LAMP YELLOW
EMERGENCY STOP
SWITCH 3 POS.
Evaporative Cooler